Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin SSOP T/R
These octal buffers/drivers are designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The ’ACT244 devices are organized as two 4-bit buffers/drivers with separate output-enable OE inputs. When OE is low, the device passes noninverted data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
4.5-V to 5.5-V VCC Operation Inputs Accept Voltages to 5.5 V Max tpd of 9.5 ns at 5 V Inputs Are TTL Compatible
Характеристики
| Бренд | Texas Instruments |
|---|---|
| Msl Level | 1 |
| Max Proce | 260 |
| Output Type | 3-State |
| Logic Function | Buffer/Line Driver |
| Typical O | 5 V |
| Рабочая температура | -40 to 85 °C |
| Minimum O | 4.5 V |
| Screening Level | Commercial |
| Propagati | 50 pF |
| Lead Finish | Gold |
| Maximum L | 24 mA |
| Maximum O | 5.5 V |
| Supplier | SSOP |
| Number Of | 2 |
| Polarity | Non-Inverting |
| Bus Hold | Нет |
| Описание продукта | 7.2 x 5.3 x 1.95 mm |
| Number Of | 8 |
| Number Of | 8 |
| Number Of | 8 |
| Input Sig | Single-Ended |
| Maximum P | 9@5V ns |
| Schedule B | 8542390000 |
| HTSN | 8542390001 |
| Страна происхождения | Malaysia |
| Maximum Q | 4 uA |
| Maximum H | -24 mA |
| Number Of | 2 Low |
SKU: SN74ACT244DBR