Application scope: Inverter, Communication interface, PLC, BVS=5000Vrms(min)@t=60s, UL approved, cUL approved

The TLP714F is a photocoupler in a 6-pin SDIP package that consists of a GaAlAs infrared light-emitting diode (LED) optically coupled to an integrated high-gain, high-speed photo detector IC chip. It provides guaranteed performance and specifications at temperatures up to 125 °C. The TLP714F is physically smaller than the one in an 8-pin DIP package and compliant with international safety standards for reinforced insulation. It thus provides a smaller footprint solution for applications that require safety standard certification. An internal noise shield provides a guaranteed common mode transient immunity of ±20 kV/ µs. The TLP714F guarantees minimum and maximum of propagation delay time, pulse width distortion. Therefore it is suitable for isolation interface between IPM and control IC circuits in motor control application. Leads of the TLP714F is bend to satisfy 8 mm PC board spacing requirements.

• Inverter logic type (open collector output)
• Package: SDIP6
• Operating temperature: -40 to 125 °C
• Supply voltage: -0.5 to 30 V
• Threshold input current: 5.0 mA (max)
• Supply current: 1.3 mA (max)
• Propagation delay time: tpHL = 400 ns (max), tpLH = 550 ns (max)
• Pulse width distortion: 400 ns (max)
• Common-mode transient immunity: ±20 kV/ µs (min)
• Isolation voltage: 5000 Vrms (min)
• Safety standards
  • UL-approved: UL1577
  • cUL-approved: CSA Component Acceptance Service No.5A
  • VDE-approved: EN60747-5-5