Analog Switch Single DPDT 9-Pin WLP T/R

The MAX14589E/MAX14594E high-density, double-pole/double-throw (DPDT) analog switches feature Beyond-the-Rails signal capability that allows signals from -5.5V to +5.5V to pass without distortion even when the power supply is below the signal range. The low RON resistance (0.2O) makes the devices ideal for low-distortion switching, such as audio. The MAX14594E has internal shunt switches that discharge the audio amplifier AC-coupling capacitance at the normally open (NO1 and NO2) terminals. This feature reduces click-and-pop sounds that occur when switching audio signals between precharged points. The switches are fully specified to operate from a single +1.6V to +5.5V power supply. Because of the low supply current requirement, VCCEN can be provided by a GPIO. When the power is not applied, switches go to a high-impedance mode and all analog signal ports can withstand signals within the analog signal range. The devices control the switches with a control bit, CB. The MAX14589E/MAX14594E are available in a 1.2mm × 1.2mm, 0.4mm pitch, 9-bump wafer-level package (WLP) and operate over the -40°C to +85°C extended temperature range.

• Distortion-Free Beyond-the-Rails Signaling
  • Negative Audio and Video Signal Capable
  • -5.5V to +5.5V Analog Signal Range Independent from V_CCEN
  • On-Resistance 0.2O (typ)
  • +1.6V to +5.5V Single-Supply Range
  • Click-and-Pop Suppression

Smooth Switch Transition

• Break-Before-Make Operation

Low Supply Current 30µA (typ) at 1.6V

• Can Be Powered by a GPIO
• High-Impedance Mode When V_CCEN Not Applied

ESD Protection on COM_

• ±15kV Human Body Model
• ±10kV IEC 61000-4-2 Air Gap
• ±8kV IEC 61000-4-2 Contact

ESD Protection on NC_ and NO_

• ±15kV Human Body Model

Small Board Space

• 9-Bump WLP (1.2mm x 1.2mm)

-40°C to +85°C Operating Temperature Range