Analog Switch Quad SPST 14-Pin SO Bulk
The 74HC/1 are high-speed Si-gate CMOS devices and are pin compatible with the "4016" of the "4000B" series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4016 have four independent analog switches (transmission gates). Each switch has two input/output terminals (Yn, Zn) and an active HIGH enable input (En ). When En is connected to VCC, a low bidirectional path between Yn and Zn is established (ON condition). When En is connected to ground (GND), the switch is disabled and a high impedance between Yn and Zn is established (OFF condition). Current through a switch will not cause additional VCC current provided the voltage at the terminals of the switch is maintained within the supply voltage range; VCC>> (VY,VZ) >> GND. Inputs Yn and Zn are electrically equivalent terminals.
Low "ON" resistance:
160 O (typ.) at VCC = 4.5 V
120 O (typ.) at VCC = 6.0 V
80 O (typ.) at VCC = 9.0 V
- Individual switch controls
- Typical "break before make" built in
- Output capability: non-standard
- ICC category: SSI
Характеристики
| Бренд | Nexperia |
|---|---|
| Supplier | SO |
| Рабочая температура | -40 to 125 °C |
| Описание продукта | 8.75 x 4 x 1.45 mm |
| Operating | 5.5|4.5|5 V |
| Lead Finish | Gold |
| Max Proce | 260 |
| Msl Level | 1 |
| Type Prod | Analog Switch |
| Schedule B | 8542390000 |
| HTSN | 8542390001 |
| Страна происхождения | United States |
| Maximum P | 500 mW |
| Output Si | Single-Ended |
| Chip Enab | Да |
| Number Of | 4 |
| Maximum O | 250 to 400 Ohm |
| Maximum T | 35@4.5V ns |
| Maximum O | 320@4.5V Ohm |
| Number Of | 4 |
| Configuration | Quad SPST |
| Input Sig | Single |
| Power Sup | Single |
| Number Of | 4 |
| Polarity | Non-Inverting |
| Propagati | 50 pF |
| Maximum P | 12@4.5V ns |
| Maximum H | 25 mA |
SKU: 74HCT4016D,112