Analog Switch Quad SPST 14-Pin CDIP

CD4016B Series types are quad bilateral switches intended for the transmission or multiplexing of analog or digital signals. Each of the four independent bilateral switches has a single control signal input which simultaneously biases both the p and n device in a given switch on or off. The CD4016 "B" Series types are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix),14-lead dual-in-line plastic packages (E suffix), 14-lead small-outline packages (M, MT, M96, and NSR suffixes),and 14-lead thin shrink small-outline packages (PW and PWR suffixes).

20-V digital or ± 10-V peak-to-peak switching

280-O typical on-state resistance for 15-V operation

Switch on-state resistance matched to within 10 O typ. over 15-V signal-input range

High on/off output-voltage ratio:
   65 dB typ. @ f_is = 10 kHz, R_L = 10 kO

High degree of linearity:
   <0.5% distortion typ. @ f_is = 1 kHz, V_is = 5 V_p-p, V_DD–V_SS O

Extremely low off-state switch leakage resulting in very low offset current and high effective off-state resistance:
   100pA typ. @ V_DD–V_SS = 18 V, T_A = 25°C

Extremely high control input impedance (control circuit isolated form signal circuit:
   10¹²Otyp.

Low crosstalk between switches:
   –50 dB typ. @ f_is= 0.9 MHz, R_L = 1 kO

Matched control-input to signal-output capacitance:
   Reduces output signal transients

Frequency response, switch on = 40MHz (typ.)

100% tested for quiescent current at 20 V

Maximum control input current of 1 µA at 18 V over full package temperature range; 100 nA at 18 V and 25°C

5-V, 10-V, and 15-V parametric ratings

Applications:

• Analog signal switching/multiplexing
  • Signal gating
  • Squelch control
  • Chopper
  • Modulator
  • Demodulator
  • Commutating switch
• Digital signal switching/multiplexing
• CMOS logic implementation
• Analog-to-digital & digital-to-analog conversion
• Digital control of frequency, impedance, phase, and analog-signal gain