16Q x18 1M Multi-Queue, 3.3V

The IDT72V51443 multi-queue flow-control devices are single chip within which anywhere between 1 and 16 discrete FIFO queues can be setup. All queues within the device have a common data input bus, (write port) and a common data output bus, (read port). Data written into the write port is directed to a respective queue via an internal de-multiplex operation, addressed by the user. Data read from the read port is accessed from a respective queue via an internal multiplex operation, addressed by the user. Data writes and reads can be performed at high speeds up to 166MHz, with access times of 3.7ns. Data write and read operations are totally independent of each other, a queue maybe selected on the write port and a different queue on the read port or both ports may select the same queue simultaneously. The device provides Full flag and Output Valid flag status for the queue selected for write and read operations respectively. Also a Programmable Almost Full and Programmable Almost Empty flag for each queue is provided. Two 8 bit programmable flag busses are available, providing status of queues not selected for write or read operations. When 8 or less queues are configured in the device these flag busses provide an individual flag per queue, when more than 8 queues are used, either a Polled or Direct mode of bus operation provides the flag busses with all queues status. Bus Matching is available on this device, either port can be 9 bits or 18 bits wide. When Bus Matching is used the device ensures the logical transfer of data throughput in a Little Endian manner. The user has full flexibility configuring queues within the device, being able to program the total number of queues between 1 and 16, the individual queue depths being independent of each other. The programmable flag positions are also user programmable. All programming is done via a dedicated serial port. If the user does not wish to program the multi-queue device, a default option is available that configures the device in a predetermined manner.

• Memory density: IDT72V51443 - Total Available Memory = 1,179,648 bits
• Configurable from 1 to 16 Queues
• 166 MHz High speed operation (6ns cycle time)
• 3.7ns access time
• Queues may be configured at master reset from the pool of Total Available Memory in blocks of 512 x 18 or 1,024 x 9
• Independent Read and Write access per queue
• User programmable via serial port
• 100% Bus Utilization, Read and Write on every clock cycle
• Individual, Active queue flags (OV, FF, PAE, PAF)
• 8 bit parallel flag status on both read and write ports
• Shows PAE and PAF status of 8 Queues
• Direct or polled operation of flag status bus
• Global Bus Matching - (All Queues have same Input Bus Width and Output Bus Width)
• FWFT mode of operation on read port
• Partial Reset, clears data in single Queue
• Expansion of up to 8 multi-queue devices in parallel is available
• JTAG Functionality (Boundary Scan)
• Available in a 256-pin PBGA, 1mm pitch, 17mm x 17mm
• HIGH Performance submicron CMOS technology
• Industrial temperature range (-40°C to +85°C) is available