Push-Pull Transformer Driver 8-Pin TDFN EP

The MAX258 is a 500mA, push-pull transformer driver designed to provide a simple solution for isolated power supplies. The IC has an internal oscillator and operates from a single +3.0V to +5.5V supply. The transformer’s secondary-to-primary winding ratio defines the output voltage, allowing selection of virtually any isolated output voltage with galvanic isolation. The device features an integrated oscillator driving a pair of n-channel power switches. Internal circuitry guarantees a fixed 50% duty cycle to prevent DC current flow through the transformer. The IC operates with up to 500mA of continuous current and features undervoltage lockout and thermal shutdown. The IC includes a low-current shutdown mode to reduce the overall supply current to less than 5µA (max) when the driver is disabled. The MAX258 is available in a small 8-pin (2mm x 3mm) TDFN package and is specified over the -40°C to +125°C temperature range.

• Simple, Flexible Design
  • +3.0V to +5.5V Supply Range
  • Low R_ON 300mO (max) at 4.5V
  • Up to 90% Efficiency
  • Provides Up to 500mA to the Transformer
  • 250kHz or 600kHz Internal Oscillator Frequency
  • -40°C to +125°C Temperature Range

Integrated System Protection

• Undervoltage Lockout
• Thermal Shutdown

Saves Space on Board

• Small 8-Pin TDFN Package (2mm x 3mm)