Development Tools Headers For ICE Devices

This family offers the advantages of all PIC18 microcontrollers – namely, high computational performance at an economical price – with the addition of highendurance Enhanced Flash program memory. On top of these features, the PIC18F1330 family introduces design enhancements that make these microcontrollers a logical choice for many high-performance, power control and motor control applications. Peripheral highlights include: 14-bit resolution Power Control PWM module (PCPWM) with programmable dead-time insertion The PCPWM can generate up to six complementary PWM outputs with dead-band time insertion. Overdrive current is detected by off-chip analog comparators or the digital Fault input (FLTA). PIC18F1330 devices also feature Flash program memory and an internal RC oscillator.

• Power-Managed Modes:
• Run: CPU on, peripherals on
• Idle: CPU off, peripherals on
• Sleep: CPU off, peripherals off
• Ultra Low 50 nA Input Leakage
• Run mode currents down to 15 µA, typical
• Idle mode currents down to 3.7 µA, typical
• Sleep mode current down to 100 nA, typical
• Timer1 Oscillator: 1.8 µA, typical; 32 kHz; 2V
• Watchdog Timer (WDT): 1.4 µA, typical; 2V
• Two-Speed Oscillator Start-up
• 14-Bit Power Control PWM Module:
• Up to 6 PWM Channel Outputs
  • Complementary or independent outputs
• Edge or Center-Aligned Operation
• Flexible Dead-Band Generator
• Hardware Fault Protection Input
• Simultaneous Update of Duty Cycle and Period:
  • Flexible Special Event Trigger output
• Flexible Oscillator Structure:
• Four Crystal modes, up to 40 MHz
• 4x Phase Lock Loop (PLL) – Available for Crystal and Internal Oscillators
• Two External RC modes, up to 4 MHz
  • Fast wake-up from Sleep and Idle, 1 µs, typical
• Two External Clock modes, up to 40 MHz
• Internal Oscillator Block:
  • 8 user-selectable frequencies from 31 kHz to 8 MHz
  • Provides a complete range of clock speeds from 31 kHz to 32 MHz when used with PLL
  • User-tunable to compensate for frequency drift
• Secondary Oscillator using Timer1 @ 32 kHz
• Fail-Safe Clock Monitor:
  • Allows for safe shutdown if peripheral clock stops
• Peripheral Highlights:
• High-Current Sink/Source 25 mA/25 mA
• Up to 4 Programmable External Interrupts
• Four Input Change Interrupts
• Enhanced Addressable USART module:
  • Supports RS-485, RS-232 and LIN/J2602
  • RS-232 operation using internal oscillator block (no external crystal required)
  • Auto-wake-up on Start bit
  • Auto-Baud Detect
• 10-Bit, up to 4-Channel Analog-to-Digital Converter module (A/D):
  • Auto-acquisition capability
  • Conversion available during Sleep
• Up to 3 Analog Comparators
• Programmable Reference Voltage for Comparators
• Programmable, 15-Level Low-Voltage Detection (LVD) module:
  • Supports interrupt on Low-Voltage Detection
• Special Microcontroller Features:
• C Compiler Optimized Architecture with Optional Extended Instruction Set
• Flash Memory Retention: > 40 years
• Self-Programmable under Software Control
• Priority Levels for Interrupts
• 8 x 8 Single-Cycle Hardware Multiplier
• Extended Watchdog Timer (WDT):
  • Programmable period from 4 ms to 131s
• Programmable Code Protection
• Single-Supply In-Circuit Serial Programming™ (ICSP™) via Two Pins
• In-Circuit Debug (ICD) via Two Pins
• Wide Operating Voltage Range (2.0V to 5.5V)