Conn LC Multimode Duplex PL ST Cable Mount 0.1dB

LC small form factor (SFF) field polish connectors with rear pivot latch shall be TIA/EIA-604 FOCIS-10 compatible. LC simplex and duplex connectors shall be field terminable. The fibers shall terminate in 1.25mm ceramic ferrules with non-optical disconnect functionality and an average insertion loss of 0.1dB per mated pair for multimode and singlemode fiber.

• TIA/EIA-604 FOCIS-10 compatible connectors
• Exceed TIA/EIA-568-B.3 requirements
• Connector housing and boot colors follow TIA/EIA-568-C.3 suggested color identification scheme
• Insertion loss: 0.10dB average (multimode and singlemode)
• Return loss: >20dB (multimode), >40dB (singlemode)
• Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
• Each simplex connector includes connector body/ferrule assembly, crimp sleeve, one boot for 900µm buffered fiber and one boot for 1.6mm – 2.0mm jacketed cable and one dust cap; 3.0mm jacketed cable connectors are also available separately
• Each duplex connector includes two connector body/ferrule assemblies, two crimp sleeves, two boots for 1.6mm – 2.0mm or 3.0mm jacketed cable or two boots for 900µm buffered fiber, two dust caps and one duplex clip
• LC duplex clip available separately for duplexing two simplex LC Connectors
• Fiber cable type: tight-buffered recommended
• Fiber cable size: accept 1.6mm – 2.0mm or 3.0mm jacketed cable, or 900µm buffered fiber (noted in part description)
• For 250µm coated fiber termination, use 250 micron fiber build-up tube kit or fan-out kits
• Ferrule type: 1.25mm zirconia ceramic (highest durability for repeated matings)
• Field polish termination
• Use field polish termination kit (FIELDKIT)
• LC multimode duplex fiber optic connector for 3.0mm jacketed cable installation.