Display Driver

The TW8810 is a highly integrated LCD TFT flat panel controller for Sharp dual-view LCD panel primarily targeting front console and rear-seat automotive infotainment applications. The TW8810 integrates a high quality NTSC/PAL/SECAM 3D video decoder and a 2D de-interlacer with low angle compensation. In addition, built-in dual-view mixer enables direct support for Sharp dual-view panel.

• NTSC (M, 4.34) and PAL (B, D, G, H, I, M, N, N combination), PAL (60), SECAM with automatic format detection
• Three 10-bit ADCs and analog clamping circuit.
• Fully programmable static gain or automatic gain control for the Y or CVBS channel
• Programmable white peak control for the Y or CVBS channel
• High quality motion adaptive 3D comb filter for both NTSC and PAL with concurrent 3D noise reduction
• PAL delay line for color phase error correction
• Image enhancement with 2D dynamic peaking and CTI.
• Digital sub-carrier PLL for accurate color decoding
• Digital horizontal PLL and Advanced synchronization processing for VCR playback and weak signal performance.
• Programmable hue, brightness, saturation, contrast, sharpness.
• High quality horizontal and vertical filtered down scaling with arbitrary scale down ratio
• Detection of level of copy protection according to Macro vision standard
• Supports YPbPr input up to 1080i with sub-sampled resolution
• Support automatic standard detection for YPbPr input
• Triple high speed 10-bit ADCs with clamping and programmable gain amplifier.
• Up to three independent RGB / YPbPr channels with corresponding SOG
• Built-in line locked PLL with sync separator
• Allows high resolution components inputs like DTV 480p, 720p, 1080i
• Allows connection with alternative Video and PC Graphics inputs.
• Support both 656 and 601 video formats
• Allows connection to external HDMI receiver
• Support additional digital 18-bit input when main digital input is 18-bit mode
• Supports panel with resolution up to WXGA
• Supports 3, 4, 6 or 8 bits per pixel up to 16.8 million colors with built-in dithering engine
• Support single channel TTL panel
• Support analog panel with analog RGB output
• Built-in programmable timing controller
• Supports dual window bitmapped OSD.
• Built-in OSD controller with BitBlit Engine
• Supports variety functions included like blinking, transparency and blending.
• Supports External 16-bit OSD with external alpha blending control.
• Support OSD compression
• Supports Panel power sequencing.
• Supports DPMS for monitor power management.
• 1.8 / 3.3 V operation
• Built-in single CCFL back light controller
• Built-in single LED back light controller
• Power-down mode
• Single 27MHz crystal
• 208-pin LQFP package