Battery Charger Development Kit

The 34676 is a dual 28 V input voltage and fully-integrated single cell Li-Ion battery charger, targeting smart handheld applications. One of the inputs is optimized for charging with a USB port, and the second is optimized for an AC/DC adapter power source. The charger has two 28 V power devices, to eliminate the need of any external power source selection and input over-voltage protection circuitry. Each of the power devices independently controls the charge current from the input, and performs as an independent charger. Only one of the two chargers operate at a time. The AC charger current and the USB charger current are programmable, up to 1.2 A and 400 mA, with an external resistor respectively. The voltage across the two external resistors is also used to monitor the actual charge current through each charger respectively. The EOC current of both chargers is the same, and programmable by an external resistor. The 4.85 V regulator can be used to power a subsystem directly. The 34676 has a 5% constant current accuracy for the AC Charger over -40 to 85oC, and a 1.0% constant voltage accuracy over -40 to 85oC. A charge current thermal foldback feature, limits the charge current when the IC internal temperature rises to a preset threshold.

• ±1.0% voltage accuracy over -45 to 85°C
• No external MOSFET, reverse blocking diode, or current sense resistor are required
• Additional voltage regulated output powered by USB input
• Battery detection input
• Charge current monitor with thermal limits
• Integrated input over-voltage protection
• Pb-free packaging designated by suffix code EP