Programmable Voltage Source With Memory 10-Pin VSON EP T/R

The BUF01900 and BUF01901 provide a programmable voltage output with 10-bit resolution. Programming of the output occurs through an industry-standard, two-wire serial interface. Once the correct VCOM voltage is established it can easily be stored into the integrated nonvolatile memory. An initial output voltage and adjustment range can be set by an external resistor-divider. With its large output current capability (up to 100mA), the BUF01900 and BUF01901 are ideally suited as programmable VCOM calibrators in LCD panels. The BUF01901 has the digital-to-analog converter (DAC) output brought out directly. It has a slightly lower cost than the BUF01900, and works very well with the integrated VCOM in traditional gamma buffers such as the BUFxx702, BUFxx703, BUFxx704 and BUF11705. The BUF01900 and BUF01901 are both available in TSSOP-8 and 3mm x 3mm DFN-10 packages. The DFN-10 package (only 0.9mm in height) is especially well-suited for notebook computers. Both devices are specified from -40°C to +85°C.

10-BIT RESOLUTION

RAIL-TO-RAIL OUTPUT

ONBOARD NONVOLATILE MEMORY

I_OUT: 100mA

LOW SUPPLY CURRENT: 900µA

SUPPLY VOLTAGE: 7V to 18V

DIGITAL SUPPLY: 2.0V to 5.5V

INDUSTRY-STANDARD, TWO-WIRE INTERFACE

HIGH ESD RATING: 2kV HBM, 500V CDM

APPLICATIONS

• LCD PANEL V_COM CALIBRATION
• LCD PANEL BRIGHTNESS AND CONTRAST CONTROL
• POTENTIOMETER REPLACEMENT
• MOTOR DRIVE
• PROGRAMMABLE POWER SUPPLY
• PROGRAMMABLE OFFSET ADJUSTMENT
• ACTUATOR CONTROL