Rohstoff-Handelsplattform

Temp Sensor Digital Serial (2-Wire, I2C) 8-Pin MSOP T/R

The STCN75 is a high-precision digital CMOS temperature sensor IC with a sigma-delta temperature-to-digital converter and an I²C-compatible serial digital interface. It is targeted for general applications such as personal computers, system thermal management, electronics equipment, and industrial controllers, and is packaged in the industry-standard 8-lead TSSOP package.The device contains a bandgap temperature sensor and 9-bit ADC which monitor and digitize the temperature to a resolution up to 0.5 °C. The STCN75 is typically accurate to (±3 °C - max) over the full temperature measurement range of –55 °C to 125 °C with ±2 °C accuracy in the –25 °C to +100 °C range. The STCN75 is pin-for-pin and software compatible with the TCN75.The STCN75 is specified for operating at supply voltages from 2.7 V to 5.5 V. Operating at 3.3 V, the supply current is typically (125 µA).The onboard sigma-delta analog-to-digital converter (ADC) converts the measured temperature to a digital value that is calibrated in degrees centigrade; for Fahrenheit applications a lookup table or conversion routine is required.The STCN75 is factory-calibrated and requires no external components to measure temperature.
  • Measures temperatures from –55 °C to +125 °C (–67 °F to +257 °F)
  • ±0.5 °C (typ) accuracy
  • ±2 °C (max) accuracy from –25 °C to +100 °C
  • Low operating current:125 µA (typ)
  • No external components required
  • 2-wire I²C/SMBus-compatible serial interface
  • Selectable bus address allows connection of up to eight devices on the bus
  • Wide power supply range - operating voltage range: 2.7 V to 5.5 V
  • Conversion time is 45 ms (typ)
  • Programmable temperature threshold and hysteresis set points
  • Pin- and software-compatible with TCN75 (drop-in replacement)
  • Power-up defaults permit standalone operation as a thermostat
  • Shutdown mode to minimize power consumption
  • Output pin (open drain) can be configured for interrupt or comparator/thermostat mode (dual purpose event pin)
  • MSOP8 (TSSOP8) package
  • Spezifikationen

    Brand STMicroelectronics
    Operating temperature -55 to 125 °C
    Product description 3 x 3 x 0.85
    Supplier MSOP
    Lead Finish Matte Tin
    Output Type Digital
    Function Temp Sensor
    Max Proce 260
    Msl Level 1
    Schedule B 8542390000
    HTSN 8542390001
    Country of origin Malaysia
    Operating 2.7 to 5.5 V
    Screening Level Extended Industrial
    Accuracy 3(Max) °C
    Accuracy ?3(Max)
    Interface Type Serial (2-Wire, I2C)
    Resolution 9 Bit
    Operating 125 uA
    SKU: STCN75DS2F